Fixing a Noisey Dryer With Las Vegas Appliance Repair Masters

Fixing a Noisey Dryer With Las Vegas Appliance Repair Masters

Today, we are looking at an Electrolux dryer and the complaint is that something broke off inside of the drum. So what we found is that the moisture sensor actually is broken, so we called the experts at Appliance Repair Las Vegas ( to help us sort things out. Some kind of clothing or something in the dryer as it was running, snagged against the moisture sensor at the back and caused it to break and come off.


Before beginning any repair always be sure disconnect the power to the appliance. It is also recommended to test the outlet for proper voltage.  The tools needed for this repair are a number 2 Philips screwdriver.

So, to begin the repair, the first thing we want to do is unplug the dryer and we’re going to open the door and then, we’ll going to gain access to our which is just located on the back housing inside the dryer here.

So now, I’m in here at the moisture sensor, you can see it’s just not attached anymore to the back housing here, the clips that mount back here should be in place and the wiring instead just came off the two terminals and you can see where it just got bent, something came, you know, this drum rotates clockwise and something was able to get on here and snag it and pull it as it was rotating.

So, we’re just going to go ahead and remove our screw number 2 Philips, now we can remove our moisture sensor here and replace it with a new one. Now, if this, you know, we’re just replacing this moisture sensor because it was damaged, there is no need to test it, it has not failed electronically.

But if this were failed electronically, what you can do is take your multimeter, place both of your test lead on each terminal here of the moisture sensor and then you can take a piece of metal like this screwdriver, go across here and that gives it the continuity and you’ll hear the audible tone if you set the multimeter to audible tone and you’ll hear it beep, that means that means that this sensor is good. That’s how you would test this sensor.

Then the reasons, you know, the symptoms that would be in place if this was electronically bad would be that the dryer, you know is shutting off too soon, the clothes are still we on your automatic cycles or potentially not shutting off at all. With some models, it will throw an error code also when it recognizes that this sensor is bad.

So now we got the new moisture sensor, first thing we’re going to do is install our wires. So it’s kind of fallen into the housing here, so we’ll just going to have to fish them out. And you may have to use a pair of needle nose depending on how far they’ve dropped in there.

Alright, now that we got the wires on, there’s this tab and we’re just going to put to this slot there and then we’re going to reinstall the screw. And that’s going to complete replacing the moisture sensor.

Read More

Fixing a Washing Machine Timer with Help From Appliance Repair of Austin

Fixing a Washing Machine Timer with Help From Appliance Repair of Austin

We’ve come to rely on our home appliances so much that we simply take it for granted that they’ll be there for us… until we realize that we’re in desperate need of an appliance repair of some kind!  The horror!  We came to this realization recently, just before we were to have family (along with 4 small kids!) come to stay with us for 10 days… and our washing machine stopped working.  Not a good feeling, let me tell you.

There are a lot of things that I’ve learned over the years as far as fixing things around the house.  But in this particular situation, my wife was in no mood for me to ‘tinker’ with things until I got it right. I needed to have this washer working normally within a day… or else!  (Or else what?  I don’t know, but I didn’t want to find out, either!)  So rather than fumble about, I decided to call in a favor from a good friend who works as a professional in appliance repair in Austin, TX at  Over the phone he was able to help me surprisingly well.

I figured with all that help I got, I should pass it along as best I could so that anyone else in need of a washer repair – in this case, replacing a broken timer – might not have to face the same ultimatum that I faced.  So… with that said, here we go.

Okay, so what we’re going to be doing here today is we’re going to be replacing the timer unit on this Kenmore washer – this will be very similar to any Whirlpool style washer…they’re all pretty much the same. So, let’s get started.

Okay, so what we’re going to do here is remove our end caps here…these just snap on – got these little clips here that hold them…a couple screws, one on each side. We’re going to pull them out. And this is set on some hooks…so this you need to slide it forward…it’s actually it’s hinged…so this won’t actually fall off…it’ll stay right on here…the hinge is here…so this just flips right back.

And here’s our timer here…okay, here’s our timer here – this one still has a little label…you can’t read’s attention technician…on how to remove this timer…a lot of times you’ll find it, especially on these older ones…this will be long gone.

So, what you want to do is pretty simple and there’s quite a few different models that use the same style. What you want to do is grab a hold of this little black thing here, in the center…a pair of needle nose plyers, and you want to pull it out a little ways…you’ll feel it pull loose, and what that’s doing is coming loose of the knob. If you try to pull that knob off like some of the other knobs come off you’ll snap this piece right off.

This piece actually comes right out…it latches in there. So you can leave that just laying in there…pull this right off…and then we have a couple little clips retaining this piece in…clear piece…pull it straight off…and we have a screw that’s holding the timer here…quarter wrench, we take our nut driver…take the screw out…we’ve already unplugged this unit also…and we can disconnect our wire here…and this timer here, when it comes out…you’ll actually see these little hooks here…and one on this side…this hooks in back, and the front slides down…now it’s hooked. So you don’t want to try and yank this off…you wanna slide it…pull that out…comes out, and that’s all there is to it…the opposite to replacing the timer.

So, we just put our screw back in…piece…now before you put the knob on…what you’ll wanna do is, you’ll leave this black piece out…and get your knob snapped in there…and then, push that in…that keeps it locked so you can pull it out…and then we just reassemble. I hoped this information helped you out.

Read More

Toilet Repairs – Fixing an American Standard Toilet

Toilet Repairs – Fixing an American Standard Toilet

If you have an American standard toilet and you are looking to change the flush valve, there’s a few things you need to look for. When you go to your hardware store, one of the first things you need to look is the existing flap and in this case, I already took out the flap, just so you can see the bracket that holds it.

And this one here is the flush valve connected to a plastic bracket and it has two holes in it and this will accept two little nipples on the side of the existing flush valve. This is a style that came out of the toilet and you can see the two nipples off to the side of the base and if you are looking to replace this and you are running to your hardware store, you are going to need to know the style.

It’s much better if you can bring this in with you, because there is an American standard number four, a number five and a number six and they all have different body shapes and lengths on the tower here. So it’s important that you know which style you have and in many cases you can actually just pull off this rubber disc here and you can replace this.

And they’ll have a couple different styles, they’ll either have a snap in like this or they’ll have one that’s threaded. So again, you need to know the style before you go into the store. To show you an example of just one of the other styles, this is for an American standard, very similar, but rather than attaching to that plastic bracket inside the tank, this is designed so you use two brass screws, unscrew the whole assembly and then you’ll have to change it like this.

This will not fit into this toilet. So it’s very important if you are looking for a flush valve for an American standard, that you are looking at the existing pieces and if possible, bring them in with you when you exchange it at the hardware store.

Read More

Simple Alternatives For The Do It Yourselfer With These Quick Tips

Simple Alternatives For The Do It Yourselfer With These Quick Tips

Tools You'll Be Able To Trust: How-To Tips For The Homeowner

Damaged, bent, or rusted metal railings are one of the very offensive eyesores typically seen on older houses. For a modern appearance that does not upstage the classic outside of your home, replace metal railing with richly textured wood supports. You leave a darker color natural contingent on your house's outdoor color or can stain the wood it.

Clean up the outside of your house. Sometimes all it takes to produce your house look and feel better is a little TLC on the outside. Trim the shrubs and yank the weedsof the flower bed. Add some ornamental landscape lighting and ensure all the outdoor light fixtures are in proper working order.

A great solution to lessen your likelihood of mould growth in your family is by making sure your bathroom is well ventilated. Bathrooms that don't have a window or some form of vent usually get steamy, but are not able to be rid of the humidity. Eventually this humidity leads to extensive mold development.

A staple tool is your drill, if you are going to do any home improvements. You require it to drive them in place and to begin screws. Make sure you have a drill that is cordless and battery controlled with a minimum of 9 volts. You should also have drill bits of numerous sizes and screw attachments.

Stickers are a really good facelift for boring furniture and appliances; getting them off is a different story. In the event you're out of ideas on how best to remove old decals from surfaces the subsequent tip is sure to aid. Spray on the stickers you desire to remove with WD 40 aerosol. Attempt to lift the edges to get the liquid. Let it sit in the solution for a minute or two and gently scrape the sticker with a plastic knife or an old credit card.

Consider the effect on your house 's resale value before you embark on a home improvement project. As an example, converting your garage into a living room may make sense for your immediate demands, but many home buyers are turned off by this sort of add-on. Even if you don't plan on selling promptly, conditions can change, and you may have to spend additional money getting your house back to the way it was.home repairs for disabled

Consider converting unused rooms within your house. Seriously look at what you need to work with before you spend too much cash adding more room or two to your house. Are you really getting much use out of that exercise office or room? Even storage spaces like attics could be transformed into something useful, like a bedroom.

It is vital to at all times keep your financial plan in mind, as you start your home improvement project. It is vital to plan the job out in advance and get prices in the substances that you have to make your vision a reality. It's additionally important to consider how long you will be taken by the project.



Read More

Improve Your Home With These Amazing Guidelines

Improve Your Home With These Amazing Guidelines

Try These Great Tips For Your House Improvement Project

A lot of homes have wall to wall carpeting that's stained and looks bad. Wood floors offer lasting allure and more durability than carpeting can provide. With these tricks, you can work smarter-not harder. Soon your house will be a stunning showplace. You will notice live in a home that is lovelier than you ever might have imagined.

If you can't afford a professional designer, do your homework. Review on-line resources, publications and magazines . You never know where you will find an image that will determine the future of your renovations. Literature can also give you the information that you must get your job done.

Add another bathroom to your house, in the event you do not yet have one. The main reason behind this is so your family does not need to fight over one bathroom. Another reason for adding another toilet is for resale value. Having two toilets makes a home more appealing for potential buyers.

Replace your air conditioning filter from time to time. A clogged up filter can actually use a lot more energy to run. You may likewise be using way more electricity than essential. Change the filter frequently to conserve cash and time.

Do not be misled by cheap imitation flooring. Granite, Marble and tile are better than replica variations of the. Floors should not have linoleum unless in a flat, counters should be granite, tile or marble. There are several alternatives that are affordable that there is really no reason for plastic variations of the real thing.

If you want dorm or your living room to truly have a contemporary clean feel to it, choose to purchase a couch with minimal cushioning and long, thin lines. Pick the sofa in a bold color free home repairs for seniors like beige, red, or black to make a statement in your region. You can dress it up with some zebra print or striped decorative pillows.

One custom that is great for maintaining your home improvement project, is setting aside a specific budget for repairs and upgrades. Homeowners who allocate a particular amount of money for such endeavors will likely be better at maintaining their residences. Carry it over to the subsequent year, in the event that you do not use all your budget.



Read More